What is the process of mechanical processing?
Article Source: SHENZHEN SITEMPO TECHNOLOGY CO., LTD.Popularity：218Issuing time:2017-08-10 11:10:52【smallinBig】
Machining of precision parts processing technology, including
the use of the feasibility of the processing center to compile a
reasonable CNC machining process, the use of the operation center of the
human nature of the characteristics of optimization of cutting
parameters.
Reasonable selection of tool geometry and the use of ordinary
high-speed steel drill and end mill processing high-precision large
aperture than titanium alloy hole processing technology routes and
measures.
And
through the actual sample processing to verify the improved tool,
optimize the cutting parameters and processing technology practicality. Titanium
alloy is a widely used superalloy, mainly used in the manufacture of
protective equipment for logging equipment, so the titanium alloy
processing technology has a direct impact on the quality of titanium
alloy products, which involves the titanium alloy cutting , Especially the deep hole drilling process, and the processing
of deep hole drilling how to determine the scope of application of
titanium.
Machining
The existing technology is the use of mixed ceramic bearings to match
the oil, such a technology may be for the spindle at 15000r / min when
the problem is not a problem. We also found that some manufacturers also use another bearing,
its internal and external edge is still composed of metal pieces, but
the rotating part is a very rigid, durable ceramic material composition.
Machining heat is a natural enemy of bearing accuracy and life. In the spindle running to 10000r / min, more representative is the use of oil mist (OilAirLube) instrumentation system. This
system provides the least (but sufficient) of the lubricating oil to
reduce the heat generated by the bearings, in addition, the blower also
helps to dissipate heat. The remaining heat is transferred to a cooling system that will not be closed in the cooling system that causes the cycle.
